The purpose of a Prestartup/Operational Readiness Review (PSR) is to ensure that initial start-ups, or start-ups following major project work, proceed safely and smoothly. As with most process safety activities a PSR will generally be performed by a small team made up of representatives from operations, maintenance, engineering, and safety.
The material in this article has been extracted from the book Plant Design and Operations.
After a piece of equipment or piping that operates under pressure has been opened and then reassembled (buttoned up) it must be pressure tested before being put back into service.
The material in this article is extracted from Chapter 2 of the 2nd edition of book Plant Design and Operations.
When developing the layout for a facility it is very important to ensure that personnel can move around quickly and safely using stairways, ladders, platforms and ramps. They should also be able to use the stairways and ladders to move maintenance equipment and tools, as needed and also to evacuate the facility during an emergency.
The material in this Article is extracted from Chapter 16 (Human Factors and Ergonomics) of the book Plant Design and Operations.
Guidance as to the types of signs and their meanings is provided below.
Prohibition signs mean "You must not" or "Do not do . . ." or "Stop". Signs of this type have a red circle, a white interior and a red bar, as illustrated in Figure 16.4.
Lockout / tagout systems are routinely used to protect workers when they are working with or close to hazardous systems. They are typically used in conjunction with the other isolation methods. Once a switch or valve is in the correct position it is locked so that it cannot be moved, and a 'Do Not Operate' tag is attached to it. (Valves are often chained in place, with the lock being used to secure the chain such that the valve handle cannot be moved.)
Human error rates can be modeled using a technique known as THERP (Technique for Human Error Rate Prediction). The method uses Boolean logic to model and predict human error rates. Hence it can be integrated Probabilistic Risk Assessment techniques - particularly Fault and Event Tree analysis.
Confined Space Entry
A Confined Space is a space which is large enough for a worker to enter but has limited openings for entry and exit and is not intended for continuous employee occupancy. Entry is considered to have occurred as soon as any part of the entrant's body breaks the plane of an opening into the space. Therefore it is not permissible, for example, to take a quick breath and to put one's head into a vessel for a quick look without having an entry permit.
Storage tanks are widely used in the process industries to store liquids that are below their boiling point at atmospheric temperature (some tanks may be insulated and they may have heating or cooling coils to maintain the temperature of the liquid that they are storing). Typically, tanks are either open to the atmosphere or to a system such as a flare or vent header that is at atmospheric pressure (this does not apply to floating roof tanks). Unlike pressure vessels, storage tanks cannot handle either high pressure or vacuum conditions.